Carlyle 1/2DR 8MM HEX BIT Socket 80MM LONG (SH1208M)
£2.29 inc. VAT
Out of stock
- 8mm hex bit socket
- 1/2in drive, 80mm
- Hand tools only
Description
Genuine Carlyle · Part no. SH1208M
An 8mm hex bit in a 1/2in drive socket, 80mm long (Carlyle SH1208M). The bit is S2 steel for strength; the socket is CR-V with a mirror chrome finish that keeps rust off. Use it for 8mm socket-head bolts that want more force than an L-key can give.
Good to know
- Is it right for brake caliper guide bolts? Many cars use 7mm hex caliper guide bolts rather than 8mm, so check the head size before you start; a bit that doesn't fill the head can round it.
- Ratchet or breaker bar? Crack a tight bolt with a breaker bar held square, then spin it out with the ratchet; never put it on an impact gun, as chrome can crack under impact.
- What about refitting? Where the workshop manual gives a torque figure, tighten to it with a torque wrench on the 1/2in drive.
Which one?
Near twin at 82mm with a knurled band: Carlyle CSH1208M. Impact version: the Carlyle 1/2 Drive 8mm Hex 60mm Long Impact Socket (CISH1208M).
Key features
- 8mm hex bit
- 1/2in drive
- 80mm long
- S2 steel bit
- CR-V socket, mirror chrome
Specification
| Brand | Carlyle |
| Part number | SH1208M |
| Barcode (EAN) | 5056667432321 |
| Weight | 0.08 kg |
| Packed size | 210 x 130 x 30 mm |
| Bit | 8mm hex |
| Drive | 1/2in |
| Length | 80mm |
| Socket | CR-V |
Additional information
| Weight | 0.085 kg |
|---|
Carlyle
More from Carlyle
Other Carlyle items on the shelf in Bulwell, all in stock.
Same shelf
Also in Sockets & Socket Sets
More from the Sockets & Socket Sets shelf. See all Sockets & Socket Sets ›













