Carlyle 15mm Angled Open Ended Spanner (CADOW15M)

Description

Genuine Carlyle · Part no. CADOW15M

The Carlyle CADOW15M is a double open-ended spanner with a 15mm jaw at each end, angled at 30 degrees on one head and 60 on the other. It suits 15mm nuts on brake and suspension parts that you can only reach from the side, with little room to move the handle. Polished chrome, size etched on the side, 140 mm packed.

Good to know

• What is the point of a spanner with the same size at both ends? The angles. Swap ends or flip it over when the handle hits something, and the jaw lands on the nut at a fresh angle.
• Can it tighten brake fixings to the right figure? No spanner can tell you that. Brake and suspension fixings should be done up to the car's figure with a torque wrench.
• Can I use it on a brake pipe union? A flare nut spanner is the right tool; an open jaw on a soft pipe nut is the classic way to round it off.

Which one?

The Carlyle 7 Piece Metric Double Open End Angle Wrench Set 10mm – 17mm (CADOWS7M) gives the angled pattern from 10mm to 17mm; for a ring end in 15mm, choose the Carlyle 15mm 12 Point Combination Wrench (CCWFP115M).

Key features

• 15mm jaw at both ends
• 30 and 60 degree head angles
• For limited swing
• Polished chrome finish
• Size etched on the side

Specification