Carlyle 9.5mm HSS Cobalt 5% Drill Bit (CBD95)

Description

Genuine Carlyle · Part no. CBD95

Carlyle CBD95 is the biggest bit in this Carlyle cobalt range at 9.5mm, the near-metric match for a 3/8 inch hole. It is M35 HSS with 5% cobalt, made to DIN 338, with a 130-degree split point and a three-flat shank that stops it spinning in the chuck under the heavier load a hole this size puts on it.

Good to know

• Will my drill chuck take it? Most 10mm and 13mm chucks will grip a 9.5mm shank; check your drill's chuck size before buying.
• How do I drill a 9.5mm hole in steel without the drill snatching? Pilot first, clamp the work, use a low speed and both hands, and ease off as it breaks through.
• Is it right for imperial fittings? 9.5mm is the near-metric match for a 3/8 inch hole, so it suits many imperial bolts and fittings of that size.

Which one?

For an M8 clearance hole, the Carlyle 9mm HSS Cobalt 5% Drill Bit (CBD9) is a size down. For M10 tapping, use the Carlyle 8.5mm HSS Cobalt 5% Drill Bit (CBD85).

Key features

• 9.5mm HSS cobalt drill bit
• Three-flat shank for a firm grip
• 130-degree split point
• M35 steel with 5% cobalt
• DIN 338

Specification