Celsus Aerial Adaptor – Female (AAN2101)

Description

Genuine Celsus · Part no. AAN2101

Celsus AAN2101 is a female DIN aerial adaptor for fitting an aftermarket stereo that has a male DIN aerial connector. It pushes straight on with no tools, so the car's aerial lead and the new head unit can be joined without cutting or soldering anything behind the dash.

Good to know

• Is this the adaptor I need? Look at the aerial connector on the back of the new stereo and the plug on the car's lead before ordering; car aerial leads use DIN (Motorola-type), ISO or, on newer cars, Fakra plugs, and these don't fit each other without an adaptor.
• Do I need tools? No. It is a push fit; just make sure it seats fully, as a half-pushed plug gives weak or crackly reception.
• What if the back of the stereo is cramped? A plain adaptor adds very little length; if the joint ends up tight against the dash, the Celsus version on its own short lead gives more slack.

Which one?

For more slack behind the stereo, the Celsus Aerial Adaptor – Female – 200mm Extension (AAN2103) does the same job on a short lead. Newer cars with a Fakra aerial plug need the Celsus Aerial Adaptor – Fakra To Male – With 12V Signal Separation (AAN2123) instead.

Key features

• Female DIN aerial adaptor
• For aftermarket stereos with a male DIN connector
• Push fit
• No tools needed

Specification