Cooling Edge POE 100 Oil / UV Dye Mix Size 500ml (CE91067BAG)

Description

Genuine Cooling Edge · Part no. CE91067BAG

Cooling Edge E-POE 100 is a 500ml mix of polyol ester compressor oil and UV leak-detection dye for car air conditioning, made for the electric compressors in hybrid and electric vehicles as well as stop-start and conventional cars. It suits systems running R1234yf or R134a, and the dye lets a leak be traced later with a UV lamp.

Good to know

• Why does a hybrid need special oil? Electric compressors in hybrid and electric cars need an oil with high electrical insulation; this one is formulated for them, with a dielectric strength of at least 75 kV quoted. Check the bonnet label or handbook for the oil your compressor calls for.
• How much oil do I add? Too much oil in an A/C system reduces cooling, so add only what came out with the old parts or the amount the vehicle maker gives for the part replaced.
• How do I find a leak with the dye? After the system has run, shine a UV lamp over joints, hoses and the condenser; the dye glows brightly where it escapes.
• Who should do the work? In the UK, refrigerant must be recovered by trained technicians with recovery equipment and never vented, so oil goes in as part of a proper regas.

Which one?

For POE oil without dye, Primalec MRL-85 in 250ml (AC54085A) or 1 litre (AC54085B); for dye on its own, Primalec Glo-Leak UV Leak Tracer Fluid (GL1234A).

Key features

• POE compressor oil with UV dye, 500ml
• For electric compressors in hybrids and EVs
• Stop-start compatible
• R1234yf and R134a
• Dielectric strength at least 75 kV

Specification