Corteco HT200C White Silicone Gasket Sealant (HT200C)

Description

Genuine Corteco · Part no. HT200C

Safety: Warning. Causes serious eye irritation. Read the label before use.

Corteco HT200C is a white silicone gasket sealant: a paste you run as a bead between two mating faces to make a gasket in place, or to back up a cut gasket. It suits sump pans, gearbox and axle covers and other engine housings on any make, and stays elastic in service from -50°C up to brief peaks of 200°C.

Good to know

• Can it replace a paper or cork gasket? Often yes on flat, stiff flanges like sumps and covers, but where the maker fits a specific shaped gasket or a set thickness matters (for example to set a gear or bearing preload), fit the proper gasket.
• How do I get a lasting seal? Scrape off every trace of the old gasket, degrease both faces until clean and dry, lay a thin, unbroken bead around the inside of the bolt holes, and assemble before a skin forms.
• Will it hold fuel? Corteco rate it against water, coolant and engine oil, but against fuels only for a limited time, so don't use it on a fuel tank sender, pump or carburettor joint.

Which one?

For a black finish and a paste that also bonds to glass, rubber and wood, see the Corteco HT300C Black Joint Paste 80 ml (HT300C), which has the same -50°C to 200°C rating.

Key features

• White silicone gasket sealant
• Solvent-free
• Stays elastic once cured
• -50°C to 200°C (brief peaks)
• Resists water, coolant and engine oil
• Copes with rough, uneven faces

Specification