Granville Exhaust Assembly Paste Cartridge – 500g (0434B)

Description

Genuine Granville · Part no. 0434B

Safety: Warning. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Read the label before use.

Granville 0434B is exhaust assembly paste in a 500g cartridge, made for sealing slip joints and sleeves as you put an exhaust system together. It goes on as a soft, ready-mixed paste that grips straight away, then cures hard in the air and faster once the exhaust heats up, so the joint stays sealed through vibration.

Good to know

• Assembly paste or repair putty? Use this paste on joints while fitting new sections or refitting old ones; a hole or crack in a pipe or box calls for a repair putty instead.
• How do I get a good seal? Clean rust and old sealant off both mating faces, run a bead round the joint, push the pipes fully home and tighten the clamp before the paste starts to set.
• Can I take the joint apart later? Once heat-cured it forms a hard, permanent seal, so expect to cut or heat the joint if that section ever needs to come off again.
• Why a cartridge? It fits a standard sealant gun and the 500g size suits a garage doing several exhaust jobs, or a full system on one car with plenty left over.

Which one?

For a smaller job the Holts Exhaust Assembly Paste – 300ml (HMTN0901A) does the same work, and the Holts Firegum tube (FG1RP) needs no gun; to patch holes and cracks rather than seal joints, use the Granville Exhaust Repair Putty (0431A).

Key features

• 500g cartridge of exhaust assembly paste
• Soft paste with quick initial grab
• Cures hard in air, faster with heat
• Resists shock and vibration once set
• Seals joints during assembly

Specification