Hammerite Direct To Rust Metal Paint – Hammered White – 750ml (5092971)

Description

Genuine Hammerite · Part no. 5092971

Safety: Warning. Flammable liquid and vapour. May cause drowsiness or dizziness. Read the label before use.

Hammerite Direct To Rust in hammered white, a 750ml tin. A clean white with a dimpled finish for metal railings, gates, garden furniture and boat or caravan fittings, it goes onto rusty or painted metal without primer and masks small dents and marks.

Good to know

• Can it go over old paint? Yes, once loose or flaking paint is scraped off. Glossy old paint should be lightly sanded to give new paint a key, then wiped clean and left to dry.
• Why pick a hammered finish over smooth? A hammered finish hides dents, pitting and uneven surfaces better than a smooth finish, so it is the one for old, pitted metal that will never look new again.
• How do I keep it off everything else? Mask nearby glass, rubber seals and painted panels with tape and paper, and put down a dust sheet before you open the tin; once dry, stray splashes are hard to shift.

Which one?

For a softer sheen with 8 years' rated protection, the Satin White in 750ml (5092886); for an even, untextured look, the Smooth White in 750ml (5092956).

Key features

• Hammered white finish
• Primer, undercoat and topcoat in one
• Goes straight onto rust or painted metal
• Brush, roller or spray
• Recoat after 4 hours
• Rated 5 years' protection

Specification