Holts EGR and Carb Cleaner 500ml (HMTN0201B)

Description

Genuine Holts · Part no. HMTN0201B

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Read the label before use.

Holts HMTN0201B is a 500ml aerosol for cleaning EGR valves and carburettors on petrol and diesel engines. It breaks down the varnish, gum and sooty build-up that makes an EGR valve stick or a carburettor run rough, and the can sprays upside down, which helps when the valve sits low on the engine.

Good to know

• Will spraying cure a sticking EGR valve? It can free one gummed up with deposits, but a diesel valve caked in hard carbon usually has to come off for cleaning, and a valve that has failed electrically won't be cured by cleaning.
• How do I use it safely? Work with the engine cool and the area well ventilated, keep sparks and flames away, and wear gloves and eye protection.
• Where should I keep it off? Don't spray it on a mass airflow sensor, which needs its own sensor cleaner, and wipe any overspray off paintwork, rubber and plastic straight away.

Which one?

For a carburettor and intake manifold job without an EGR valve, the Wynns 54179 Air Intake & Carburettor Cleaner has a jet spray for reaching inside the intake. The PMA CARBC says it is safe with oxygen sensors and catalytic converters.

Key features

• 500ml aerosol
• For EGR valves and carburettors
• Petrol and diesel engines
• Shifts varnish and gum
• Sprays upside down

Specification