Isopon Multipurpose Primer Aerosol – 450ml (MPPG/AL)

Description

Genuine Isopon · Part no. MPPG/AL

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Read the label before use.

Isopon Multipurpose Primer is a 450ml aerosol for priming a bodywork repair before the colour goes on, especially over Isopon body filler. It dries quickly to a smooth, even base that helps the topcoat grip, so small dents, scratches and filled areas are ready for paint.

Good to know

• Why prime over filler? Primer gives filler and bare metal one even surface that the topcoat can grip; without it, the repair can show through the colour. Sand the filler smooth before priming.
• Should I sand the primer? Yes, once dry, flat it lightly with fine wet-and-dry paper to remove dust nibs and show up any low spots; fill and re-prime those before the colour goes on.
• Is it the right primer for bare aluminium or galvanised steel? Those metals usually need an etch primer for paint to hold; this is a general-purpose primer for filler and repaired areas.

Which one?

For bare aluminium or galvanised steel, U-POL Acid #8 Etch Primer (ACID/AL); for a thicker, sandable primer that fills minor marks, U-POL High5 Primer Grey (HIGHG/AL).

Key features

• Primer, 450ml aerosol
• Smooth base for topcoat
• Suits Isopon fillers
• For repaired areas
• Quick drying

Specification