Isopon P38 Body Filler – 1.2 Litre (P38/2)

Description

Genuine Isopon · Part no. P38/2

Safety: Danger. Causes skin irritation. Causes serious eye irritation. Suspected of damaging the unborn child. Causes damage to organs through prolonged or repeated exposure. Contains epoxy constituents. May produce an allergic reaction. Read the label before use.

Isopon P38 in the 1.2 litre tin is a two-part polyester body filler, packed with its hardener, for filling dents and scratches in most metals, glass fibre and wood. It spreads smoothly, leaves no pinholes and sands easily, and the tin is a good size for larger repairs or a few smaller ones, with a step-by-step repair guide inside.

Good to know

• How much hardener do I add? Stick to the hardener amount on the pack: too much can stain the paint over the repair, too little leaves the filler soft.
• How much should I mix at once? Mix only as much as you can spread in a few minutes, because once the hardener is in, polyester filler starts to set and can't be reworked.
• Can P38 fill a hole? Standard body filler is not made to span holes; bridge a hole with a glass fibre filler first and finish over it with body filler.
• Will it hold over rust? Filler and resin do not stop rust, so grind rust back to clean, bright metal before you repair, or it keeps spreading underneath.

Which one?

For a bigger job, the same filler comes in a 2.25 litre tin (P38/4). To bridge a hole before filling, use Isopon P40 Glass Fibre (P40/1 600ml or P40/2 1 litre).

Key features

• 2K polyester body filler
• Hardener in the pack
• Smooth spreading, pinhole-free
• Very easy to sand
• Step-by-step repair guide
• 1.2 litre tin

Specification