J-B Weld Perma-Lock High Strength Threadlocker – 36ml (27136A)

Description

Genuine J-B Weld · Part no. 27136A

Safety: Danger. Causes skin irritation. Causes serious eye irritation. May cause cancer. May cause respiratory irritation. Read the label before use.

J-B Weld Perma-Lock High Strength Threadlocker is a 36ml bottle for fasteners that must never work loose: rocker arm studs, frame bolts, stud bolts and bushes on vibration-heavy parts. It suits fasteners from 1/4 inch to 1 inch, copes with up to 148 degrees C (300 degrees F) and has a no-spill, no-clog cap.

Good to know

• Will I be able to undo the bolt later? High strength threadlocker usually needs heat before the fastener will come out, so use it only where the part isn't removed at routine services.
• Which fastener sizes suit it? From 1/4 inch to 1 inch; small screws are better with a lower strength grade so they don't snap on removal.
• Can it go on hot parts? It is rated up to 148 degrees C, so it suits most engine and chassis bolts but not exhaust manifold studs or turbo fixings.
• How do I apply it? Degrease the threads, put a few drops on the bolt where it engages the nut or hole, tighten to torque and leave it to cure before loading the part.

Which one?

For bolts you'll undo at the next service, J-B Weld Perma-Lock Medium Strength Threadlocker (24236A) comes in the same 36ml size; for wicking into close-fitting studs, Hylomar Stud Lock (F/HY2170/050M) is very high strength and low viscosity.

Key features

• 36ml bottle
• High strength
• For 1/4 inch to 1 inch fasteners
• Temperature resistant to 148 degrees C (300 degrees F)
• No-spill, no-drip, no-clog cap
• OEM approved

Specification