Jubilee Hose Clips M/S 6X 120-150mm – Box of 5 (6XMSP)

Description

Genuine Jubilee · Part no. 6XMSP

In this box are 5 Jubilee size 6X worm drive clips that close onto anything from 150mm down to 120mm across. They are zinc protected mild steel with a fully threaded band and the Kitemark for BS 5315:1991, for large hoses, flexible pipe and sleeve joints.

Good to know

• How do I measure a hose this big? Wrap a tape or a piece of string round it where the clip will sit and divide that length by 3.14 to get the diameter, then pick a clip with that figure near the middle of its range.
• Should I check it after the first use? Check hose clips again once the hose has been through a warm-up and cool-down, as rubber can settle and leave a clip a little slack.
• Will it hold a perished hose? No. A hose clip holds a hose on its pipe; it will not seal a hose that is split, swollen or perished, which needs replacing.

Which one?

The Jubilee 6MSP (110-140mm) is the next size down and the Jubilee 7MSP (135-165mm) the next size up, both in boxes of 5. For an odd size, the Jubilee 11mm Multiband Banding Handy Pack M/S – 10 Metre (MB1708) lets you cut band to any length.

Key features

• Box of 5 size 6X clips
• Closes from 150mm to 120mm
• Fully threaded band
• Zinc protected mild steel
• Kitemarked to BS 5315:1991

Specification