Milwaukee 1/2 Click Torque Wrench 40-200NM (4932500851)

Description

Genuine Milwaukee · Part no. 4932500851

Milwaukee's 4932500851 is a 1/2in drive click torque wrench set from 40Nm to 200Nm, accurate to ±3%, with a 90-tooth ratchet head that needs only a 4° swing. A strong click tells you the figure is reached, a ribbed ring locks the setting, and the knurled handle gives a sure grip.

Good to know

• Is 40-200Nm right for car wheels? Yes, it's the natural choice: most car wheel nuts and bolts go on at about 100 to 140Nm, which sits in the middle of this wrench's range, where it reads most accurately. Use your vehicle's own figure from the handbook.
• How do I tighten wheel nuts with it? With the wheel on the ground, set the figure, then work round in a criss-cross order, pulling smoothly on the handle grip until it clicks once. Stop at the click, and check them again after a short drive.
• What must I not do with it? Undo tight bolts (that's a breaker bar's job), pull on past the click, or add a pipe to the handle. After use, wind it back to its lowest setting, not below, to keep the spring accurate.

Which one?

For hub nuts and bigger figures, the Milwaukee 1/2 Drive Click Torque Wrench 60-340NM (4932500825); for torque-plus-angle bolts, the Carlyle 1/2 Drive Digital Flex Head Torque Wrench with Angle Indicator 16 to 339Nm (CDTW12FL).

Key features

• 1/2in drive, 40-200Nm
• ±3% accuracy
• 90-tooth head, 4° swing
• Strong, clear click
• Ribbed locking ring
• High-contrast scale

Specification