Milwaukee 1/2in Drive Breaker Bar 610mm Long (4932471867)

Description

Genuine Milwaukee · Part no. 4932471867

This Milwaukee breaker bar, 4932471867, is 610mm long in 1/2in drive, with a head that swivels through 180 degrees. The length is what matters: for the same push it gives about 1.6 times the turning force of a 380mm bar, which is what you want on seized wheel bolts, crank pulley bolts and rusted suspension fixings.

Good to know

• Is longer always better? Long bars need room to swing and can snap a small socket or bolt before you feel it; use a 1/2in socket in good condition and pull steadily, not with jerks.
• Can I use it to tighten wheel bolts? No. With this much leverage it is easy to over-tighten or stretch a bolt; finish with a torque wrench to the handbook figure.
• How do I stop the car moving while I pull? Undo wheel bolts with the wheel on the ground and the handbrake on, then lift the car; for hub or pulley bolts, hold the hub or crank as the manual describes.

Which one?

For tight spaces under the car, the shorter Milwaukee 1/2in Drive Breaker Bar 380mm Long (4932471866) swings easier; for even more reach, the Carlyle 1/2 Drive 750mm Long Breaker Bar (CBB12750M).

Key features

• 610mm long, 1/2in drive
• 180 degree swivelling head
• About 1.6 times the force of a 380mm bar
• For seized wheel and suspension bolts

Specification