Milwaukee 9 Piece Circlip Pliers Set Size 235x475x65mm (4932492496)

Description

Genuine Milwaukee · Part no. 4932492496

Milwaukee's 9 piece circlip plier set (4932492496) gives large, medium and small pliers, each in straight, 45 degree and 90 degree versions, with tip sizes of 1.8, 1.2 and 0.9 mm. Every plier switches between internal and external circlips with its dial, which covers circlips on driveshafts, wheel bearings, gear linkages and garden machinery.

Good to know

• Which tip size do I need? The tips must fill the circlip's holes snugly: small rings with fine holes take the 0.9 mm tips, bigger ones the 1.2 or 1.8 mm. Tips that are too small slip out and can bend or launch the clip.
• Internal or external? Internal circlips sit in a groove inside a bore, such as a wheel bearing housing, and are squeezed to remove; external ones sit on a shaft and are spread open. Turn the dial to switch each plier.
• Why the angled tips? Straight tips work when you face the clip; the 45 and 90 degree tips reach clips deep in a bore or behind other parts. Always wear eye protection, as a circlip can fly off at speed.

Which one?

For a single plier that switches between internal and external, the Carlyle Circlip Plier Int/Ext. Quick Switch 8-24mm Size 10in. (3151A) comes with changeable tips.

Key features

• Nine pliers in three sizes
• Straight, 45 and 90 degree tips
• Tip sizes 1.8, 1.2 and 0.9 mm
• Internal or external with an all-metal dial
• Double-dipped, slip-resistant grips

Specification