Milwaukee Carbide Burrs TC 6 x 12.7mm Set-5 Piece (4932493576)

Description

Genuine Milwaukee · Part no. 4932493576

A five-piece set of Milwaukee carbide burrs in the 6 x 12.7mm size, with cone, flame, ball, round-nosed cylinder and type B shapes. Use them to shape, deburr and open out holes in steel, cast iron, aluminium, brass and copper: cleaning up a cut exhaust pipe end, easing a bracket hole that won't line up or smoothing a welded seam.

Good to know

• What do I run them in? A die grinder or drill whose collet takes the shank; check your collet size before buying, and keep the burr moving so it doesn't dig in or chatter.
• Which shape suits which job? The ball hollows out curves and opens holes, the flame and cone reach into corners and narrow slots, and the round-nosed cylinder cuts with both its end and its side.
• Will it cope with hardened steel? Yes, the set is rated for hardened as well as soft steel; wear eye protection because the teeth throw sharp chips, and let the burr cut rather than leaning on it.

Which one?

For tighter spots, the smaller Milwaukee Carbide Burrs TC 6 x 10mm Set (4932493577) has the same five-piece idea; to finish an edge by hand afterwards, the Carlyle 4 Piece File Set (CFS4PC) needs no power.

Key features

• Five burr shapes: B, C, D, H and M
• Double-cut teeth for smaller chips and less vibration
• Cuts hard and soft steel, cast iron and non-ferrous metals
• Made to DIN 8033

Specification