Milwaukee Flap Disc 115mm G80-1 Piece (4932478948)

Description

Genuine Milwaukee · Part no. 4932478948

A single Milwaukee ceramic hybrid flap disc, 115mm across in medium 80 grit, for 115mm angle grinders. It is the finishing step after rough grinding: blending a ground-down weld into the panel, feathering rust repairs back to clean steel and smoothing cut edges ready for primer, on steel, stainless and aluminium.

Good to know

• Why 80 grit rather than a coarser disc? A lower grit number means a coarser abrasive that removes metal faster and leaves deeper scratches; a higher number gives a finer finish, so 80 leaves a surface that filler and primer cover more easily.
• Can I go straight to 80 on a big weld? You can, but it is slow; knock the weld down with a coarse disc first, then switch to this one to blend it in without thinning the panel around it.
• Does it suit aluminium parts? Yes, it is listed for non-ferrous metals such as aluminium as well as steel; keep a separate disc for aluminium so steel particles don't get pressed into it.

Which one?

For fast removal before this one, the Flap Disc 115mm G40 (4932478946); for shaping small areas in tight corners, the Carbide Burrs TC 6 x 12.7mm Set (4932493576).

Key features

• Ceramic hybrid flap disc
• Medium 80 grit for blending and finishing
• Flexible flaps follow curved panels
• Low heat build-up, less discolouring of stainless

Specification