NAPA Booster Cables 8.5mm x 3m (PCH101)

Description

Genuine NAPA · Part no. PCH101

NAPA's PCH101 booster cables pair 8.5mm cable with a 3m length for jump starting a vehicle from another battery. The set weighs 0.94 kg and comes with a carry bag, while the PVC covering is oil, acid and heat resistant and the clips are heavy duty and fully insulated.

Good to know

• How do I connect them? Red to the flat battery's positive, red to the good battery's positive, black to the good battery's negative, then black to bare metal on the car with the flat battery, away from the battery. Remove in reverse.
• Will they start my car? Thicker cable carries more current, which large diesels and cold mornings need; thin leads get hot and may not turn a big engine.
• Where do I connect on a newer car? Many have jump start points under the bonnet; the handbook shows where.

Which one?

For much thicker cable over the same 3m, the Maypole Jump Leads – 20mm x 3m (3525B) uses 20mm cable. If you want a stated output, the Maypole Jump Leads – Peak Output 270A – 11mm x 2M (MP3507) gives 270A peak through 11mm cable, 2m long.

Key features

• 8.5mm cable, 3m long
• Set weighs 0.94 kg
• Oil, acid and heat resistant PVC covering
• Heavy duty clips with full insulation
• Carry bag supplied

Specification

Brand	NAPA
Part number	PCH101
Barcode (EAN)	5056536575081
Weight	0.94 kg
Packed size	50 x 250 x 250 mm
Cable size	8.5mm
Length	3m
Cable covering	PVC, oil, acid and heat resistant
Clips	Heavy duty, fully insulated
Storage	Carry bag

Need a new car battery? See our car batteries, supplied and fitted at our Bulwell shop.