Pearl Coolant/Heater Hose – 1/2in ID – 20m (PHH01)
£77.59 inc. VAT
2 in stock
Next-day delivery Order by 3pm tomorrow and it’s with you on Tuesday.
Not sure it’s right for your car? WhatsApp us your reg
- 1/2in heater hose
- 20m coil
- EPDM rubber
Description
Genuine Pearl · Part no. PHH01
A 20m coil of Pearl coolant and heater hose with a 1/2in inside diameter, made from EPDM rubber for car heating systems working between -40C and +110C. Cut off what you need to replace a perished heater feed or return hose, a bypass or a small coolant pipe, and keep the rest for the next job.
Good to know
- Will 1/2in suit my car? Heater hose is sized by its bore, so measure the outside of the pipe it pushes onto, or the old hose's inside; the hose should be a tight push fit.
- Can I use it for fuel or oil? No, EPDM is made for coolant and water and swells if soaked in oil or fuel; those lines need hose made for them.
- How do I fit it? With the engine cold, cut the hose square with a sharp knife, push it fully over each pipe and clip both ends, then top up with the coolant your handbook specifies and bleed out any air.
Which one?
The larger 5/8in bore version is Pearl Coolant/Heater Hose PHH02, also 20m.
Key features
- 1/2in inside diameter
- 20m coil
- EPDM rubber
- For heating systems, -40C to +110C
- Cut to the length you need
Specification
| Brand | Pearl |
| Part number | PHH01 |
| Barcode (EAN) | 5014002008020 |
| Weight | 5.32 kg |
| Packed size | 365 x 365 x 100 mm |
| Inside diameter | 1/2in |
| Length | 20m |
| Material | EPDM rubber |
| Temperature range | -40C to +110C |
Additional information
| Weight | 5.32 kg |
|---|
Pearl
More from Pearl
Other Pearl items on the shelf in Bulwell, all in stock.
Same shelf
Also in Hoses & Connectors
More from the Hoses & Connectors shelf. See all Hoses & Connectors ›













