Pearl Exhaust Clamp – 1 1/2in Size 1 1/2in. (PEC03C)

Description

Genuine Pearl · Part no. PEC03C

This is the Pearl PEC03C exhaust clamp for 1 1/2in pipe, about 38mm across: a U-bolt with a saddle and nuts that squeezes a female exhaust pipe down onto the male pipe inside it, closing the joint so it does not blow or work loose. 1 1/2in is one of the smaller sizes in the Pearl range.

Good to know

• How do I confirm 1 1/2in is right? Measure the outside of the outer pipe at the joint; a reading of about 38mm matches this clamp, while a clearly bigger pipe needs the next size up.
• Can I reuse the old clamp instead? Better not: old U-bolts stretch and rust, the nuts seize, and a tired clamp often will not pull the joint tight again.
• Is it safe to fit at home? Let the exhaust cool fully first, and if the car is raised, support it on axle stands or ramps rather than relying on the jack alone.

Which one?

For ten of this size see the Pearl Exhaust Clamp – 1 1/2in – Pack Of 10 Size 1 1/2in. (PEC03); a slightly thinner pipe takes the 1 3/8in clamp (PEC02C), and a larger one the 1 5/8in (PEC04C).

Key features

• U-bolt exhaust clamp for 1 1/2in pipe
• Clamps a female pipe over a male pipe
• Thread length sized for the pipe diameter
• Also made in a pack of 10

Specification