Pearl Exhaust Clamp – 1 7/8in – Pack Of 10 Size 1 7/8in. (PEC07)

Description

Genuine Pearl · Part no. PEC07

Ten Pearl U clamps for 1 7/8in exhaust pipe, part number PEC07. Fitted over a sleeved joint, where the female end of one pipe slides over the male end of the next, each clamp pulls tight so the joint holds firm and doesn't blow. A useful pack for garages and home mechanics doing several joints in 1 7/8in pipe.

Good to know

• Does a blowing joint fail the MOT? It can: a major exhaust leak, or one that could affect emissions readings, is an MOT failure, so reclamp the joint or replace the worn section before the test.
• Why does my joint keep shaking loose? Worn rubber hangers let the exhaust move and knock, which works clamps loose; check them while you are under the car and renew any that are split.
• How do I check it's 1 7/8in? Measure the pipe itself with callipers rather than the old clamp; a millimetre reading divided by 25.4 gives the size in inches.

Which one?

If the pipe measures nearer 2in, take the Pearl Exhaust Clamp – 2in – Pack Of 10 Size 2in. (PEC08); nearer 1 3/4in, the Pearl PEC06.

Key features

• U clamp for exhaust joints
• 1 7/8in pipe size
• Holds sleeved joints firm
• Pack of 10

Specification