Pearl Heater Hose (PHH04)
£28.39 inc. VAT
3 in stock
Next-day delivery Order by 3pm tomorrow and it’s with you on Tuesday.
Not sure it’s right for your car? WhatsApp us your reg
- Heater hose
- For coolant feed and return
- Cut to length
Description
Genuine Pearl · Part no. PHH04
Pearl heater hose, the flexible rubber hose that carries hot engine coolant to the heater matrix behind the dash and back again, so the cabin gets warm. It is listed under a 10mm bore in a 20m length, which suits small heater and bypass pipes; cut what you need and clip each end.
Good to know
- Why does my heater blow cold? A leaking or collapsed heater hose can starve the heater of coolant, but so can low coolant, an airlock or a stuck thermostat, so check the level and look for leaks first.
- Will a 10mm bore fit my pipes? Measure the outside of the pipe the hose pushes onto; the hose should need a firm push to go on, and check the bore printed on the pack when it arrives.
- How do I replace a heater hose? With the engine cool, clamp off or drain the coolant, swap the hose, clip both ends, then refill with the right coolant and bleed out air.
Which one?
For a heater hose made to SAE J20 R3 with a stated temperature and pressure rating, see the Workshop Warehouse Heater Hose 13mm (HH1) or 16mm (HH2).
Key features
- Heater hose for coolant
- Rubber, flexible
- Feeds and returns the heater
- Cut to length
Specification
| Brand | Pearl |
| Part number | PHH04 |
| Barcode (EAN) | 5014002065993 |
| Weight | 2.33 kg |
| Packed size | 360 x 360 x 60 mm |
| Detail | Heater hoses are flexible tubes in a vehicle’s cooling system that carry hot coolant from the engine to the heater core, enabling cabin heating |
| Use | Coolant to and from the heater |
Additional information
| Weight | 2.33 kg |
|---|
Pearl
More from Pearl
Other Pearl items on the shelf in Bulwell, all in stock.
Same shelf
Also in Hoses & Connectors
More from the Hoses & Connectors shelf. See all Hoses & Connectors ›













