Simoniz Tough Black Satin – 500ml (SIMVHT51D)

Description

Genuine Simoniz · Part no. SIMVHT51D

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Read the label before use.

Simoniz Tough Black Satin is a 500ml spray for a chip-resistant, low-sheen black on parts that get knocked about: wheel arch areas, suspension brackets, roof bars and trailer frames. It dries fast and goes on smoothly without a primer.

Good to know

• Why satin for chassis parts? A lower-sheen finish shows fewer surface marks and dents than gloss, so pitted brackets, arches and older metalwork look tidy without perfect preparation.
• How do I refresh faded black trim pieces? Take them off if you can, wash and degrease, scuff lightly, mask any rubber seals and apply light coats, letting each dry before the next.
• Does it stop rust? It is a tough, chip-resistant topcoat rather than a rust treatment; on rusty steel, take the rust back to sound metal first, or use a direct-to-rust paint.

Which one?

For a shiny finish, Simoniz Tough Black Gloss (SIMVHT52D); straight onto rust, Hammerite Direct To Rust Satin Black (5084778).

Key features

• Satin black, 500ml aerosol
• Chip resistant
• Fast drying
• Smooth finish
• No primer required

Specification