Workshop Warehouse Copper Tube Terminals (Cable Lugs) 25Mm2 X 8Mm (ET72)

Description

Genuine Workshop Warehouse · Part no. ET72

These Workshop Warehouse ET72 cable lugs are copper tube terminals for 25mm2 cable with an 8mm stud hole. The tin-plated copper gives a low-resistance, corrosion-resistant end for heavy cables that bolt to M8 studs, such as battery terminals, starter motors and isolator switches.

Good to know

• Is 8mm the right hole? It suits an M8 stud; check your battery clamp, starter or isolator before buying, as M6 studs need the 6mm lug.
• Can I solder instead of crimping? A proper crimp with a lug crimper is the usual method; solder makes the cable stiff where it leaves the lug, and it can crack there with vibration.
• Why cover it with heat shrink? It seals the end of the cable, stops green corrosion creeping up the copper strands, and gives a neat finish.

Which one?

The Workshop Warehouse ET71 is the same lug with a 6mm stud hole. For lighter cable on an M8 stud, the Pearl Blue Ring Terminals, 8.4 mm, Pack of 100 (PWC405B) are crimp rings.

Key features

• For 25mm2 cable
• 8mm stud hole
• High-conductivity copper
• Bright electro-tin plating
• Low-resistance connection

Specification