Workshop Warehouse Copper Tube Terminals (Cable Lugs) 70Mm2 X 10Mm (ET77)

Description

Genuine Workshop Warehouse · Part no. ET77

The Workshop Warehouse 70mm2 x 10mm copper tube terminal is the heavy-duty lug of the range, for thick cable on trucks, winches, big inverters and battery banks, bolting onto a 10mm stud. Made from high-conductivity copper with electro-tin plating, it keeps resistance low where the current is highest.

Good to know

• Do I need 70mm2? Only if the cable is 70mm2; trucks, winches and big inverters often use it, but always read the size on the sheath and match the barrel to it.
• Will a 10mm hole fit an 8mm stud? It will go on, but the lug can shift and the contact area is smaller; use a lug whose hole matches the stud for the tightest joint.
• Any tips for crimping cable this thick? Use a hydraulic crimper with the right die, crimp in more than one place along the barrel if the die is narrow, and seal it with heavy heat shrink.

Which one?

For 50mm2 cable on an 8mm stud, the Workshop Warehouse Copper Tube Terminals 50Mm2 X 8Mm (ET75); for lighter cable with a 10.5 mm ring, Pearl Yellow Ring Terminals, 10.5 mm, Pack of 100 (PWC849B).

Key features

• 70mm2 cable size
• 10mm stud hole
• High-conductivity copper
• Electro-tin plated
• For heavy-current cable

Specification