Workshop Warehouse Repair Washers – Imperial 1/4 X 1 (M6 X 25) (HRW2)

Description

Genuine Workshop Warehouse · Part no. HRW2

Workshop Warehouse HRW2 repair washers are the 1/4 x 1 size, equal to M6 x 25: a 1/4in hole with a 1in outside diameter, in zinc plated steel. The broad face spreads an M6 bolt's grip over plastic undertrays, splash shields, wheel arch liners and mudguards, and covers holes that have torn or worn oversize.

Good to know

• Can these save a torn undertray mounting? Often, yes; a wide washer under the bolt bridges a split or enlarged hole in the plastic, as long as enough sound material is left around it.
• Is 1/4in the same as M6? Close: 1/4in is about 6.35mm, so the hole takes an M6 bolt with a little play; the M6 x 25 in the name is the metric equivalent.
• How tight should I go on plastic? Just until the washer sits flat and the panel is held; overtightening cracks plastic and pulls the washer into it.

Which one?

For a still wider face on the same bolt, the Workshop Warehouse Repair Washers – Imperial 1/4 X 1 1/2 (HRW6); for M10 bolts, the Pearl Repair Washers, M10 x 50 mm, Pack of 100 (PRW1021B).

Key features

• Repair washers 1/4 x 1 (M6 x 25)
• Large outside diameter
• Zinc plated steel
• High strength and durability

Specification