Workshop Warehouse Repair Washers – Imperial 3/8 X 1 1/4 (HRW15)

Description

Genuine Workshop Warehouse · Part no. HRW15

Workshop Warehouse HRW15 repair washers fit 3/8in bolts and measure 1 1/4in across, in zinc plated steel, in a box weighing 0.70 kg. The slightly smaller face than the widest size suits brackets, mounts and flanges where there is limited flat area around the hole but a plain washer would still be too small.

Good to know

• How do I choose between 1 1/4in and wider? Measure the flat area around the hole; the washer should sit fully flat without overhanging an edge, a fold or a weld.
• Will a 3/8in washer fit my metric bolt? The 3/8in hole is about 9.5mm, so it suits 3/8in bolts; an M10 bolt is slightly larger, so check before you rely on it.
• Do repair washers stop bolts loosening? No, they spread load; on parts that vibrate, a nyloc nut or medium strength threadlock resists loosening better.

Which one?

If there is room for more spread, the Workshop Warehouse Repair Washers – Imperial 3/8 X 1 1/2 (HRW5); to stop a nut loosening, the Workshop Warehouse Nylon Lock Nuts Unf 5/16 Size 5/16in. (HNN2) show the nyloc type.

Key features

• Repair washers 3/8 x 1 1/4
• Wide outside diameter
• Zinc plated steel
• Durable

Specification