Wot-Nots Battery Terminal – Post Converter (PWN199)

Description

Genuine Wot-Nots · Part no. PWN199

The Wot-Nots PWN199 post converter is a battery clamp that goes on the post and lets you bolt an existing ring-terminal cable straight onto it. Sold singly and made from flexible metal, it suits leads that end in a ring, such as an earth strap or accessory feed, where there is no clamp to fit the post.

Good to know

• When would I use it? When a lead ends in a ring terminal and has to go on a battery post, for example an earth strap with rings at both ends, or a cable whose old clamp has been cut off.
• Which post does it fit? The facts don't say positive or negative; the positive post is slightly larger than the negative, so check it against the post you are fitting before tightening.
• Can I stack rings on it? Only as many as the bolt allows with the nut fully on; a ring held by a half-engaged nut works loose and the joint gets hot under load.

Which one?

For a ready-made strap with a clamp at one end and an 8mm ring at the other, see the Pearl Universal Battery Strap – 12in Insulated (PES11C).

Key features

• Converts a battery post to take a ring terminal
• Bolt-on for existing ring cables
• Flexible metal
• Pack of 1

Specification

Brand	Wot-Nots
Part number	PWN199
Barcode (EAN)	5014002041065
Weight	0.01 kg
Packed size	65 x 140 x 20 mm
Type	Post to ring converter

Need a new car battery? See our car batteries, supplied and fitted at our Bulwell shop.