Wot-Nots Wiring Connectors – Clear – 30A Terminal Block (PWN396)

Description

Genuine Wot-Nots · Part no. PWN396

The Wot-Nots PWN396 is a clear 30A terminal block, the heavy-duty one in the range, with large sleeves and screws for thicker cable on 12 Volt circuits. It suits joins on higher-current feeds such as a winch control, compressor or auxiliary power line, as well as household wiring jobs.

Good to know

• Do I need 30A? Only if the circuit's fuse is that high; the block must be rated at or above the fuse, and on small circuits a lower-rated block is neater.
• How tight should the screws be? Firm enough that the wire cannot be pulled out, but do not overtighten; a crushed strand heats up under heavy current.
• Where should I mount it? In a dry spot away from heat, inside an enclosure or insulated as the maker requires, and with the cables clipped so they cannot pull on the screws.

Which one?

For lighter circuits the 15A Terminal Block (PWN280) is smaller; for a sealed joint on heavy cable, the Yellow – Butt – Pack of 25 (PWN793) are 35 Amp crimp connectors.

Key features

• Clear 30A terminal block
• For 12 Volt circuits
• Larger sleeves for heavier cable
• Car or household use
• Must be insulated

Specification