Fastglas Resin – 500ml (RE/LA)

Description

Genuine Fastglas · Part no. RE/LA

Safety: Danger. Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. Read the label before use.

This is the 500ml tin of Fastglas Resin, the size for one small glass fibre repair, such as a hole or crack in a steel panel or a damaged glass fibre part. Wet out glass fibre mat or tissue with it over the damage and, by Fastglas's own figure, the repair is set and dry within 30 minutes, with the method printed on the pack.

Good to know

• How do I lay the patch? Brush resin on, press the cut mat into it and dab more resin through until the mat turns see-through, with no dry white patches left.
• What should I do before applying? Any repair material only holds as well as the surface under it, so sand back to clean, sound material and remove grease and dust first.
• Why is my resin slow to set? Cold slows the set of filler and resin, so work in a warm, dry place where you can.
• Can I paint straight over it? For a smooth finish on show panels, glass fibre repairs are usually skimmed with a fine body filler before primer.

Which one?

For bigger patches or several repairs, the 1 litre Fastglas Resin (RE/XL). You'll also need mat: the Plastikit Professional Glass Fibre Mat Size 5m2 (FIBRE/5) cuts easily with scissors.

Key features

• Glass fibre resin in a 500ml tin
• For fixing damaged bodywork
• Use with mat or tissue
• Dry within 30 minutes
• On-pack instructions

Specification