Jubilee Hose Clips M/S 000 9.5-12mm – Box of 10 (000MS)

Description

Genuine Jubilee · Part no. 000MS

This box holds 10 Jubilee 000MS clips, the smallest of the standard worm drive sizes, closing from 12mm down to 9.5mm. Made in zinc protected mild steel and Kitemarked to BS 5315:1991, they are for the thin hoses on a car where a bigger clip would leave a long, awkward tail.

Good to know

• How tight should a clip this small go? Only until the hose is held and stops leaking; on a thin hose a few turns too many will crush it against the pipe or cut the rubber.
• My hose is under 9.5mm, what then? This size bottoms out at 9.5mm, so look at the Jubilee junior clips or O clips, which are made for smaller hoses than a standard worm drive clip.
• Where should I put the screw? Set the screw housing where a driver can reach it square on, as a screw reached at an angle is easy to round off.

Which one?

For the very small hoses below this range, the Jubilee junior clips such as the NB0709 (7-9mm) or NB0810 (8-10mm) come in packs of 50. For a stainless 9.5-12mm clip, choose the Jubilee 000SS.

Key features

• Box of 10 size 000 clips
• Closes from 12mm to 9.5mm
• Smallest standard Jubilee worm drive size
• Zinc protected mild steel
• Kitemarked to BS 5315:1991

Specification