Jubilee Hose Clips M/S 0X 18-25mm – Box of 10 (0XMS)

Description

Genuine Jubilee · Part no. 0XMS

Jubilee 0XMS is a box of 10 size 0X hose clips that tighten onto hoses from 18mm to 25mm in diameter. The zinc protected mild steel band is threaded along its whole length, giving fine adjustment across that range, and each clip is BSI Kitemarked to BS 5315:1991.

Good to know

• My hose is at the top of the size 0 range, should I pick 0 or 0X? Pick the size that puts your measurement nearer the middle of its range; at the top end of a size 0 the 0X closes onto it with band to spare.
• Why check it again after a drive? Check hose clips again once the hose has been through a warm-up and cool-down, as rubber can settle and leave a clip a little slack.
• Do I have to take the hose off to fit it? No. Undo the screw fully, wrap the band round the hose on its pipe and feed the end back into the housing.

Which one?

Size 0X clips also come in the Jubilee Hose Clip Handy Pack M/S – Pack of 100 (HP100MS) and the Jubilee Workshop Hose Clip Pack M/S – 143 Clips (HCP143MS). The Jubilee 1AMS (22-30mm) is the next size up.

Key features

• Box of 10 size 0X clips
• Tightens onto hoses from 18mm to 25mm
• Band threaded along its whole length
• Zinc protected mild steel
• BSI Kitemarked to BS 5315:1991

Specification