Carlyle 32mm 12 Point Long Beam Combination Wrench (CCWLNS132M)

Description

Genuine Carlyle · Part no. CCWLNS132M

Photo shows the range. Size as stated.

Carlyle's 32mm long beam combination spanner gives extra leverage for big nuts that won't shift with a standard handle. It has a 12-point zero chamfer ring that grips worn heads, a patented anti-slip open end, a hot forged body with chrome finish and a colour filled 32mm mark.

Good to know

• Where would I use a 32mm long beam? On big nuts where a socket won't fit, such as on a pipe or close to a panel, or as the holding spanner while a socket turns the other side.
• Can it replace a breaker bar on hub nuts? Not really: driveshaft and hub nuts are very tight and are normally done with a 1/2 inch or 3/4 inch drive socket and bar, then torqued to the maker's figure.
• How do I keep it on the nut? Use the ring end, push it fully home and keep the beam square to the nut while pulling; a ring that sits at an angle can ride up and round the corners.

Which one?

For a shorter 32mm, the Carlyle 32mm 12 Point Combination Wrench (CCWFP132M); for 30mm in the same long pattern, the Carlyle 30mm 12 Point Long Beam Combination Wrench (CCWLNS130M).

Key features

• 32mm long beam combination spanner
• Zero chamfer 12-point ring
• Patented anti-slip open end
• Hot forged, chrome finish
• Colour filled size mark

Specification

Brand	Carlyle
Part number	CCWLNS132M
Weight	0.46 kg
Packed size	435 x 66 x 19 mm
Size	32mm
Ring	12 point, zero chamfer
Pattern	Long beam