Milwaukee Crimping Ratchet Insulated Terminals (4932499025)

Description

Genuine Milwaukee · Part no. 4932499025

A ratchet crimper for pre-insulated terminals, the coloured spade, bullet, ring and butt connectors used when fitting a towbar socket, a dash camera feed or repairing a loom. Three jaws cover red terminals for 0.3 – 1.0mm² cable, blue for 1.5 – 2.5mm² and yellow for 4.0 – 6.0mm².

Good to know

• Which jaw do I use? Match the jaw to the coloured sleeve on the terminal, and pick the terminal by the cable's cross-section: red for 0.3 – 1.0mm², blue for 1.5 – 2.5mm², yellow for 4.0 – 6.0mm².
• Why a ratchet crimper? The jaws won't open until the crimp is complete, so every joint gets the same full squeeze; the quick-release lever lets you back out if a terminal went in wrongly.
• How do I know a crimp is good? Strip just enough insulation for the bare strands to fill the metal barrel, crimp, then give the wire a firm tug; it shouldn't move at all.
• What can't it crimp? Bare uninsulated terminals, the open-barrel pins inside factory plugs and heavy battery cable lugs all need their own crimpers; this one is for the coloured insulated type.

Which one?

To strip the cable first, see the Milwaukee Multi Purpose Wire Stripper Crimper (4932493816) or our Carlyle Insulated Wire Stripping Pliers – 6in (IWSP6).

Key features

• Three colour-coded crimp cavities
• Red, blue and yellow insulated terminals
• Dual ratchet for a full crimp
• Quick-release lever
• Comfort grips

Specification