Carlyle Cutting Disc 115×1.0x22mm – Pack of 5 (CTD1611522)

Description

Genuine Carlyle · Part no. CTD1611522

Carlyle CTD1611522 is a pack of 5 thin cutting discs for 115mm angle grinders, 115mm across, 1.0mm thick with a 22mm centre hole, rated to 13,300 RPM and made to EN12413. The thin disc cuts quickly with little waste and less heat, for cutting exhaust pipe, seized bolts, brackets and sheet in mild, carbon or stainless steel.

Good to know

• Will it fit my grinder? It suits a 115mm angle grinder with the standard 22mm spindle; the grinder's top speed must not be more than the disc's 13,300 RPM.
• Can I grind with the side of the disc? No. A 1.0mm cutting disc cuts with its edge only; side pressure can shatter it, so use a flap or grinding disc for that.
• What safety kit do I need? Keep the guard fitted, wear eye protection and gloves, and keep sparks away from fuel lines, the fuel tank and the battery.

Which one?

To smooth the cut edge or grind off welds, use a flap disc: the Carlyle Flap Disc 115mm ZA40 (FLD1152240) for fast removal or the Carlyle Flap Disc 115mm ZA60 (FLD1152260) for a finer finish.

Key features

• Pack of 5 cutting discs
• 115 x 1.0 x 22mm
• Rated to 13,300 RPM
• Cuts carbon, mild and stainless steel
• Made to EN12413

Specification