Axcar Exhaust Clamp – U Style – 28mm (AXC00140)

Description

Genuine Axcar · Part no. AXC00140

Axcar AXC00140 is a pack of 10 U-style exhaust clamps in the 28mm size, for small-bore pipe joints where a male pipe slides inside a female one. Each U-bolt and saddle pulls the overlap tight, with enough thread on the U to grip a 28mm pipe firmly. Ten in a box suits a workshop or anyone fitting several sections.

Good to know

• Why buy ten? A full exhaust often has several joints, and old clamps rarely come off in a state worth reusing, so a box covers the whole system with spares left over.
• How do I check 28mm is right? Measure across the outside of the outer, female pipe at the joint with calipers; the clamp size is the pipe diameter it is made to close round.
• What if the old clamp will not undo? Soak the nuts in penetrating oil first; if they still seize, cut the U-bolt off with a hacksaw or grinder, wearing eye protection and keeping clear of fuel and brake lines.

Which one?

For inch-sized pipes the Pearl range runs from 1 3/8in (PEC02C) to 2 1/2in (PEC11C), and a box of ten 2in clamps is the Pearl Exhaust Clamp – 2in – Pack Of 10 Size 2in. (PEC08).

Key features

• Pack of 10 U-style clamps
• 28mm pipe size
• Joins a male pipe into a female pipe
• Enough thread on the U to grip the pipe

Specification