Carlyle Spark Plug Socket 16mm 21mm-155mm Long (CWSP3001014M)

Description

Genuine Carlyle · Part no. CWSP3001014M

A long, double-ended spark plug socket with a 16mm end and a 21mm end, 305mm long with a detachable 155mm L-bar for leverage. It is made for plugs sitting deep in long plug wells, where a short plug socket on an extension can wobble and lose its grip on the plug.

Good to know

• Which end do I need? Car plugs are mostly 14mm, 16mm or 20.8mm hex; the 16mm end suits 16mm plugs, and the 21mm end is the usual size for plugs with a 20.8mm hex. Check your plugs before buying.
• Does it suit narrow wells? Its outside diameter is 22.2mm, so check your plug well is wider than that, especially on engines with tight coil-pack wells.
• Any tips for removal? Work with the engine cold, blow out the well first, and start new plugs by hand before tightening to the maker's figure.

Which one?

For 16mm plugs in a cramped bay, the Carlyle Spark Plug Socket T- Bar Swivel 16mm (CWSP1621M); for a 1/2in ratchet on 20.8mm-hex plugs, the Carlyle Socket – Spark Plug SAE – Rubber Insert Standard – 1/2in Drive – Size 13/16in. (SSP1226).

Key features

• Double-ended: 16mm and 21mm
• 305mm long reach
• Detachable 155mm L-bar
• 22.2mm outside diameter
• For deep-seated plugs

Specification