Wot-Nots Wiring Connectors – Blue – Self-Stripping Tab – Pack of 2 (PWN013)

Description

Genuine Wot-Nots · Part no. PWN013

Wot-Nots PWN013 holds just 2 blue self-stripping connectors, enough to wire in one accessory: one to take the feed and one for the switched or earth side. Each splices two cables by clamping them inside the plastic body, where a blade cuts through the insulation and makes contact, without stripping the wire.

Good to know

• Is two enough for my job? For a single add-on such as a dash camera or a phone charger, yes; if you are wiring several lights or a trailer socket, the pack of 10 is the better size.
• How do I fit one properly? Lay the existing wire in the through channel and the new wire in the closed-end channel, then squeeze the blade fully down with pliers until it is flush, and close the lid.
• Which wires should I not tap into? Leave airbag, ABS and engine management wiring alone; for those, follow the car maker's wiring advice or the handbook rather than adding a tap.

Which one?

For more connectors, the Blue – Self-Stripping Tab – Pack of 10 (PWN759) is the same item in a bigger pack, and the Self-Stripping – Assorted – Pack of 8 (PWN850) mixes red, blue and yellow.

Key features

• Pack of 2 blue self-stripping connectors
• Splices two cables without stripping
• Pre-insulated
• Closed with pliers or a crimping tool

Specification