Isopon P40 Glass Fibre – 1 Litre (P40/2)

Description

Genuine Isopon · Part no. P40/2

Safety: Danger. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. May cause respiratory irritation. Suspected of damaging the unborn child. Causes damage to organs through prolonged or repeated exposure. Contains epoxy constituents. May produce an allergic reaction. Read the label before use.

Isopon P40 is a two-part polyester paste reinforced with glass fibre, made for bridging holes and gaps that ordinary body filler can't span. This 1 litre tin comes with its hardening solution and works on all metals, galvanised steel included, as well as filling and bonding GRP, wood, brick, concrete and ceramics. It sets hard quickly into a strong, watertight repair.

Good to know

• Where does P40 fit in the job? Standard body filler is not made to span holes; bridge a hole with a glass fibre filler first and finish over it with body filler.
• Does it go on galvanised steel? Yes, Isopon say P40 suits all metals, galvanised steel among them; key the surface with abrasive and degrease it before you apply.
• How much should I mix at once? Mix only as much as you can spread in a few minutes, because once the hardener is in, polyester filler starts to set and can't be reworked.
• Is it a structural repair? Rust in load-bearing parts of the body, such as near suspension or seat belt mounts, needs a proper repair, normally welding; filler or glass fibre there fails the MOT.

Which one?

For a single small hole, the 600ml tin (P40/1); for bigger jobs, the 1.85 litre tin (P40/4). To finish over it, Isopon P38 Body Filler (P38/2) spreads smoothly and sands easily.

Key features

• Glass fibre reinforced 2K polyester paste
• Bridges holes and gaps
• All metals, including galvanised steel
• Also fills and bonds GRP, wood, brick, concrete, ceramics
• Hardener supplied
• 1 litre tin

Specification