Weldfast Welding Tips – 0.6mm – 140 -Pack of 10 Size 140a (WLD00118)

Description

Genuine Weldfast · Part no. WLD00118

Weldfast Welding Tips – 0.6mm – 140 (WLD00118) are MIG contact tips, a pack of 10, sized for 0.6mm wire in torches that take the 140 tip. The contact tip passes current into the wire as it feeds, so a fresh one is the first fix when a hobby MIG starts to splutter on thin car panels.

Good to know

• Which tip do I need? Two things must match: the hole must suit your wire, here 0.6mm, and the tip's thread and length must suit your torch; hold your old tip next to the new one, as tips for different torches are not interchangeable.
• When should I change a tip? Replace it when the hole has worn oval, spatter has built up on the end or the wire has welded itself to the tip; a worn tip makes the arc wander and the wire feed stutter.
• Why use 0.6mm wire at all? Thin wire runs at lower current and gives fine control on thin body panels and repair sections, where heavier wire is quicker to burn through; for thicker steel, a heavier wire with matching tips is the better pick.

Which one?

For 0.8mm wire in the same torch, the Weldfast 0.8mm 140 tips (WLD00119); if your torch takes the larger 250 tip, the Weldfast Welding Tips – 0.6mm – 250 – Pack of 10 Size 250a (WLD00208).

Key features

• MIG contact tips for 0.6mm wire
• 140 size
• Pack of 10

Specification