Workshop Warehouse Repair Washers – Imperial 3/16 X 1 (M5 X 25) (HRW1)

Description

Genuine Workshop Warehouse · Part no. HRW1

Workshop Warehouse HRW1 repair washers are 3/16 x 1, the imperial match for M5 x 25, with a 3/16in hole and 1in outside diameter in zinc plated steel. They back up small screws and 3/16in pop rivets in thin sheet, plastic trim or rubber, so the fixing holds without tearing through the material.

Good to know

• Can I use them behind pop rivets? Yes, a washer on the back of a 3/16in rivet in thin or soft material gives it something solid to flare against, so the joint doesn't pull out.
• Do they suit M5 screws? The 3/16in hole is about 4.8mm, a close fit on an M5 screw; the name's M5 x 25 is that metric equivalent.
• Where else do they help? On mudflaps, rubber strips and fabric covers, where a small washer would let the screw head pull straight through.

Which one?

For a smaller face on the same 3/16in hole, the Workshop Warehouse Repair Washers – Imperial 3/16 X 3/4 (M5 X 19) (HRW13); for M6 bolts, the Workshop Warehouse Repair Washers – Imperial 1/4 X 1 (M6 X 25) (HRW2).

Key features

• Repair washers 3/16 x 1 (M5 x 25)
• Large outside diameter
• Zinc plated steel
• Strong and durable

Specification