Wynns Red Gasket Maker 80 ml. (36144B)

Description

Genuine Wynns · Part no. 36144B

Wynns Red Gasket Maker is an 80 ml tube of oxime (MEKO free) RTV silicone made for the hottest gasket jobs, recommended for inlet manifolds and turbo joints. It runs continuously from -50C to +300C and up to 340C intermittently, and resists oils, fuels and coolants for a long-lasting formed-in-place seal.

Good to know

• When do I need the red one? On joints that run hot, such as inlet manifolds and around the turbo, where its higher temperature rating gives more margin than a standard silicone.
• Is anything off limits? Head gaskets, and areas constantly soaked in petrol; otherwise it replaces most gaskets or goes where the maker specifies silicone.
• How much should I use? A thin, continuous bead run inboard of the bolt holes; on an inlet manifold, excess squeezed into the ports can break off into the engine.
• When can I start the engine? Give it time to cure before heat and pressure reach the joint; check the curing time on the tube.

Which one?

For coolant and vibration-prone joints, Wynns Grey Gasket Maker (36134B) is the one; for a sensor-safe black silicone in a power can, Wynns Gasket Maker Power Can – Black (57680).

Key features

• 80 ml tube
• Oxime (MEKO free) RTV silicone
• -50C to +300C continuous, 340C intermittent
• Recommended for inlet manifolds and turbos
• Resists oils, fuels and coolants

Specification