Weldfast Welding Tips – 0.8mm – 140 – Pack of 10 Size 140a (WLD00119)

Description

Genuine Weldfast · Part no. WLD00119

Weldfast Welding Tips – 0.8mm – 140 (WLD00119) are a pack of 10 MIG contact tips with the bore for 0.8mm wire, made for torches that use the 140 size tip. 0.8mm is the wire most hobby MIG welders run for brackets, floor pans, sills and general mild steel repairs, and tips wear out as the wire feeds through.

Good to know

• How do I know it fits my torch? Unscrew the old tip and compare length and thread with the 140 size stated on the pack, check the gas shroud still passes over it, then make sure the wire on your reel is 0.8mm.
• Can I run thinner wire through this tip? It will feed, but the loose fit lets the contact point jump about, so the arc is erratic; match the tip to the wire every time you change reels.
• How do I make tips last longer? Keep the gas shroud clean, use anti-spatter on the nozzle, snip the wire end square before striking and don't hold the torch too close; a pack of 10 means you can swap one the moment it misbehaves.

Which one?

For thin 0.6mm wire on body panels, the Weldfast 0.6mm 140 tips (WLD00118); for torches that take 250 tips, the Weldfast Welding Tips – 1.0mm – 250 – Pack of 10 Size 250a (WLD00210) suit heavier wire.

Key features

• MIG contact tips for 0.8mm wire
• 140 size
• Pack of 10

Specification