Granville Exhaust Repair Putty – 250mg (0431A)

Description

Genuine Granville · Part no. 0431A

Safety: Warning. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Read the label before use.

Granville's 0431A is a heat-curing exhaust repair putty in a 250ml tub, for patching small holes and cracks in a silencer, box or pipe. It is a fibrous, water-based putty that hardens as the exhaust gets hot and is rated to withstand temperatures up to 1000C, which makes it a quick fix until a section needs replacing.

Good to know

• What size of damage can it fix? Pinholes, small holes and cracks in otherwise sound metal; if the pipe or box is rotted through or flaking, putty will not hold and the section needs replacing.
• How do I prepare the exhaust? Let it cool fully, wire-brush the area back to clean metal, and work the putty well into and around the hole before smoothing it over.
• How is it cured? It sets by heat, so once applied let it dry a little and then run the engine to bring the exhaust up to temperature, as the instructions on the tub describe.
• Is it for joints? It is a repair putty; for sealing slip joints while fitting an exhaust, an assembly paste is the right product.

Which one?

To seal joints while fitting an exhaust, choose the Granville Exhaust Assembly Paste Cartridge – 500g (0434B) or the Holts Exhaust Assembly Paste – 300ml (HMTN0901A); the Holts Firegum tube (FG1RP) is a handy size for both jobs.

Key features

• 250ml tub of exhaust repair putty
• Withstands temperatures up to 1000C
• Heat-curing for a quick repair
• Water-based fibrous putty
• Patches holes and cracks

Specification